Microwave Sensors

Product Details:

Other Details:

• The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz) and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide detection field depends on detectors.
•  It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. 
• Its installation is very convenient and its using is very wide.
•  Detection is possible to go through doors, panes of glass or thin walls.

Function:
Can identify day and night:

• It can work in the daytime and at night when it is adjusted on the “sun” position (max). 
• It can work in the ambient light less than 3LUX when it is adjusted on the “3” position (min). 
• As for the adjustment pattern, please refer to the testing pattern.

SENS adjustable: 

• It can be adjusted according to using location. The detection distance of
• low sensitivity could be only 2m and high sensitivity could be 16m which fits for large room.

Time-Delay is added continually:

• When it receives the second induction signals within the
• first induction, it will restart to time from the moment.

OME Problem and Solved Way:
The load don’t work:

• Check the power and the load.
• Whether the indicator light is turned on after sensing? If yes, please check load.
• If the indicator light is not on after sensing, please check if the working light corresponds to the ambient light.
• Please check if the working voltage corresponds to the power source.

The sensitivity is poor:

• Please check if in front of the sensor there shouldn’t be obstructive object that

Test:

• Affect to receive the signals.
• Please check if the signal source is in the detection fields.
• Turn the LUX knob clockwise
• Please check the installation height.
• On the maximum (sun), Turn
• The SENS knob clockwise on

The sensor can’t shut automatically the load:
the maximum (+). Turn the a. If there are continual signals in the detection fields.
TIME knob anti-clockwise on b. If the time delay is set to the longest.
the minimum (10s). c. If the power corresponds to the instruction.

Note:

• Electrician or experienced human can install it.
• Switch on the power and test it
• Can not be installed on the uneven and shaky surface
• In front of the sensor there shouldn’t be obstructive object affecting detection.
• Avoid installing it near the metal and glass which may affect the sensor.
• For your safety, please don’t open the case if you find hitch after installation.
• In order to avoid the unexpected damage of product, please add a safe device of current 6A
• When installing microwave sensor, for example, fuse, safe tube etc.
• The sensor can’t shut automatically the load: a. If there are continual signals in the detection fields. b. If the time delay is set to the longest. c. If the power corresponds to the instruction

Product Details:

We provide finest quality Microwave Fall Ceiling Sensor with most the most superior standards and performance available

Specifications:

1. Convenience Safety
2. Saving Energy & Practical Functions
3. Detection through doors, panes of glass, thin walls.
4. It can identify Day & Night.
5. Good Sensitivity Detector
6. Detecting Angle: 360/180 Degree
7. Human Detection
8. Energy Saving Switch

 

Applications:
Used in Buildings, Offices, Shops, Hospital, Bathrooms, Corridors, Home, Step & Parking Area.

Product Details:

SPECIFICATION:Power Sourcing: 220 -240V/AC
Detection Range: 360°/180°Power Frequency: 50/60Hz
Detection Distance: wall: 5-15m (adjustable) 
ceiling: 1-8m (radius), adjustable
HF System: 5.8GHz CW radar, ISM band Transmission Power: <0.2mW
Ambient Light: <3-2000LUX (adjustable)Time Delay: Min. 10sec±3sec Max.12min±1min
Installing Height: wall 1.5-3.5m  ceiling: 2-8mRated Load: 1200W
Power Consumption: approx 0.9WDetection Motion Speed: 0.6-1.5m/s

Product Details:

It install in High ceiling upto 16 mtr where no other sensor work bcoz of hight.

It controll Loadcapacity of 1500W 
LEDload -1000W

Product Details:

SPECIFICATION:

Voltage: 110-277V/AC Power Frequency: 50/60Hz

Detection Angle: 360° Detection Range: 50%, 100%(choice)

Daylight sensor: 2lux, 10lux, 50lux, Detection Distance: 4-10m (radius), adjustable 2000lux (choice)
HF System: 5.8GHz CW radar, ISM band

Transmission Power: <0.2mW
Power Consumption: approx 0.9W

Hold Time: 5s, 30s, 90s, 3min, 5min, Detection Motion Speed: 0.6-1.5m/s 10min, 20min, 30min (choice)
Installing Height: 4-15m

Stand-by Period: 10s, 1min, 5min, 10min,30min, 60min, +∞,0s (choice
Rated Load: Max.2000W (220-277V/AC) 1000W (110-130V/AC)

Stand-by DIM Level: 10%, 20%, 30%, 1000W (220-277V/AC)

50% (choice) 500W (110-130V/AC